再进行SW-B上面同样的配置
[SW-B]interface Eth-Trunk 1
[SW-B-Eth-Trunk1]mode lacp-static
[SW-B-Eth-Trunk1]trunkport GigabitEthernet 0/0/1 to 0/0/3
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW-B-Eth-Trunk1]
这时再在SW-A上查看变化：
[SW-A-Eth-Trunk1]dis eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1 WorkingMode: STATIC
Preempt Delay: Disabled Hash arithmetic: According to SIP-XOR-DIP
System Priority: 32768 System ID: 4c1f-cc45-3688
Least Active-linknumber: 1 Max Active-linknumber: 8
Operate status: up Number Of Up Port In Trunk: 3
--------------------------------------------------------------------------------
ActorPortName Status PortType PortPri PortNo PortKey PortState Weight
GigabitEthernet0/0/1 Selected 1GE 32768 2 305 10111100 1
GigabitEthernet0/0/2 Selected 1GE 32768 3 305 10111100 1
GigabitEthernet0/0/3 Selected 1GE 32768 4 305 10111100 1
Partner:
--------------------------------------------------------------------------------
ActorPortName SysPri SystemID PortPri PortNo PortKey PortState
GigabitEthernet0/0/1 32768 4c1f-cccd-490f 32768 2 305 10111100
GigabitEthernet0/0/2 32768 4c1f-cccd-490f 32768 3 305 10111100
GigabitEthernet0/0/3 32768 4c1f-cccd-490f 32768 4 305 10111100
[SW-A-Eth-Trunk1]
